Wiki Article
Noise reduction coefficient
Nguồn dữ liệu từ Wikipedia, hiển thị bởi DefZone.Net
The noise reduction coefficient (commonly abbreviated NRC) is a single-number rating intended to describe the average sound absorption performance of a material, derived from reverberation-room measurements. In common usage it is reported on a scale from 0.0 (very low absorption) to 1.0 (very high absorption), though values greater than 1.0 can occur in reverberation-room testing due to measurement effects such as edge diffraction and non-ideal diffuse-field conditions rather than “more than 100%” absorption.[1][2]
NRC should not be confused with the sound transmission class (STC), a single-number rating derived from laboratory measurements of airborne sound transmission loss through building elements (for example walls, doors and windows).[3][4] In general terms, STC relates to sound transmitted through a construction element, while NRC relates to sound absorbed within a room by surfaces and treatments.
Technical definition
[edit]The noise reduction coefficient is a single-number rating, rounded to the nearest 0.05, based on the average of a material’s sound absorption coefficients at 250, 500, 1000 and 2000 Hz.[5] The absorption coefficients of materials are commonly determined through use of standardized testing procedures, such as ASTM C423[6] that is used to evaluate the absorption of materials in eighteen one-third octave frequency bands with center frequencies ranging from 100 Hz to 5000 Hz. Absorption coefficients used to calculate NRC are commonly determined in reverberation rooms of qualified acoustical laboratory test facilities using samples of the particular materials of specified size (typically 72 square feet [6.7 m2] in an 8 ft × 9 ft [2.4 m × 2.7 m] configuration) and appropriate mounting.
In reverberation-room methods, absorption coefficients are derived from changes in measured reverberation time between an empty room and the room with the test specimen present; NRC is then reported as a rounded average of selected frequency-band coefficients.[5][1]
History
[edit]Wallace Clement Sabine was the first scientist to study the sound-absorbing characteristics of materials in a scientifically rigorous manner. Paul Sabine, a distant cousin of Wallace, studied the repeatability of sound absorption coefficient measurements in reverberation chambers. Paul Sabine's work in the 1920s–1930s laid the groundwork for the ASTM C423 test methodology still used today.
Prior to the development of a standard procedure for material testing or reverberation chamber construction, data at low frequencies was highly unreliable and differed significantly from manufacturer to manufacturer. This is one of the primary reasons why the noise reduction coefficient historically did not include the value at 125 Hz (128 Hz at the time).[7]
Factors affecting noise reduction coefficient
[edit]Mounting type
[edit]The NRC is highly dependent on the type of mounting,[8] which, if not specified, is usually a Type A mounting (ABPMA mounting #4) where the material is placed directly on the floor, wall, or ceiling.
Acoustical ceiling tiles are often tested in Type E400 mounting, which simulates a 16-inch-deep (410 mm) plenum. This deeper airspace typically boosts the low frequency performance of the tile, but may not impact the NRC rating (since the NRC does not include the 125 Hz octave band).
Sample size
[edit]There is potential for greater error or overemphasizing the acoustic efficacy of a material if tested sample sizes are smaller than the standardized 8-by-9-foot (2.4 m × 2.7 m) modules. The perimeter-to-area ratio has a significant effect on the overall sound absorption of a material, and may effect the NRC.
Thickness
[edit]Thicker samples of the same material often absorb more sound and are better at absorbing lower in frequency. Thicker materials also have larger surface area at the sides, resulting in increased sound absorption due to edge effects.
Applications
[edit]NRC is most commonly used to rate general acoustical properties of acoustic ceiling tiles, baffles, banners, office screens, and acoustic wall panels. It is occasionally used to rate floor coverings.[9]
NRC is intended to be a simplified acoustical rating of room construction and finish materials when the acoustical objectives of the space are less than sensitive. The NRC average is rounded to the nearest 0.05 due to a typical lab repeatability of ±0.05 for 2 standard deviations. Reproducibility between different labs is roughly three times higher at ±0.15 for 2 standard deviations. NRC is a useful rating for general purpose rooms where speech noise build-up is the major concern: lobbies, open offices, reception areas, etc. In certain applications, such as designs of music rehearsal rooms, performance spaces, and rooms employed for critical speech, it is usually more appropriate to consider the sound absorption coefficients at the individual one-third octave band frequencies, including those above and below the bands used to compute NRC.
When evaluating the NRC of similar materials, the following table can be used to approximate whether there's an aural difference:[10][11]
| Difference in coefficient | Effect for most situations |
|---|---|
| 0.05–0.10 | Little |
| 0.10–0.20 | Significant |
| 0.20 and above | Considerable |
New standards
[edit]In ASTM C423 reporting, the sound absorption average (SAA) is another single-number rating derived from reverberation-room absorption coefficients. SAA is calculated from twelve one-third-octave-band coefficients from 200 Hz to 2500 Hz and is rounded to the nearest 0.01, whereas NRC is based on four mid-frequency coefficients (250, 500, 1000 and 2000 Hz) and is rounded to the nearest 0.05.[5]
See also
[edit]References
[edit]- ^ a b Hughes, W. O. (2015). Examination of the Measurement of Absorption Using the Reverberant Room Method (PDF) (Report). NASA.
- ^ "The Equivalent Volume of a Reverberation Chamber" (PDF). DAGA Proceedings.
- ^ "ASTM E90 — Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements". ASTM International.
- ^ "ASTM E413 — Classification for Rating Sound Insulation". ASTM International.
- ^ a b c "ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method". Intertek. Cite error: The named reference "IntertekC423" was defined multiple times with different content (see the help page).
- ^ "ASTM C423".
- ^ Watson, Floyd (1941). Acoustics of Buildings (Third ed.). John Wiley & Sons, Inc. p. 110.
- ^ "ASTM E795".
- ^ Harris, Cyril (1955). "Acoustical Properties of Carpet". Journal of the Acoustical Society of America. 27 (6): 1077. Bibcode:1955ASAJ...27.1077H. doi:10.1121/1.1908124.
- ^ Egan, David (1972). Concepts in Architectural Acoustics. McGraw-Hill Book Company. ISBN 0-07-019053-4.
- ^ Beranek, Leo (1960). Noise Reduction. McGraw-Hill Book Company.