උදවු:Convert units

Template {{convert}} is used to convert a value from one unit of measurement to another. This page documents some features of units, and lists units that are commonly used in conversions.

Default output

[සංස්කරණය]

If no output unit is specified, the default output for the input unit will be used. Using defaults provides greater uniformity across articles.

Some options provide text that the template may mistakenly use for the output unit, if none is specified. That can be avoided by providing an empty output unit, as shown in the following examples.

  • {{convert|4|ft}} → 4 අඩි (1.2 m)
  • {{convert|4|ft|adj=mid|-long}} → 4-අඩි ([convert: unknown unit])
  • {{convert|4|ft||adj=mid|-long}} → 4-අඩි-long (1.2 m)

The second of the above examples produces an error because "-long" is interpreted as the name of the output unit. The third example avoids that by specifying an empty output unit which means "use the default".

The following also works, although it sets the output precision to 0.

  • {{convert|4|ft|0|adj=mid|-long}} → 4-අඩි-long (1 m)

The last example works because "|0" sets the output precision to zero, and convert does not look for an output unit once the precision has been specified because a precision is always given after the output unit, if any.

The standard SI prefixes can applied to the following units. සැකිල්ල:Sidebar metric prefixes

Unit type Unit code Unit name
Area a are
m2 square metre
Charge coulomb coulomb
Energy J joule
Force N newton
Length m metre
Magnetic field strength T tesla
Mass g gram
Power W watt
Pressure Pa pascal
Radioactivity Bq becquerel
Ci curie
Time s second
Volume L litre
l litre
m3 cubic metre

Some SI prefixes are demonstrated in the following. As a convenience, "micro" can be entered as "u" instead of "μ".

  • {{convert|1.23|Gm|angstrom}} → 1.23 ගිගාමීටර (1.23×1019 Å)
  • {{convert|1.23|Mm|angstrom}} → 1.23 මෙගාමීටර (1.23×1016 Å)
  • {{convert|1.23|Ts|hour}} → 1.23 teraseconds (340,000,000 h)
  • {{convert|1.23|nJ|Wh}} → 1.23 nanojoules (3.4×10−13 Wh)
  • {{convert|1.23|μm|in}} → 1.23 මයික්‍රොමීටර (4.8×10−5 in)
  • {{convert|1.23|um|in}} → 1.23 microමීටර (4.8×10−5 in)
  • {{convert|1.23|um|uin|abbr=on}} → 1.23 μm (48 μin)
  • {{convert|18|mm|in}} → 18 මිලිමීටර (0.71 in)
  • {{convert|18|km|mi}} → 18 කිලෝමීටර (11 mi)

The above demonstrates that "uin" is the unit code for microinch.

An input unit can be converted to any number of output units—the outputs are specified as a "combination" by separating unit codes with a space (" ") or a plus ("+"). Using a space as a separator does not work if any of the unit codes contains a space.

For example, each of the following converts 1.2 km2 to acres, square yards, and hectares.

  • {{convert|1.2|km2|acre sqyd ha}} → 1.2 square කිලෝmetres (300 acres; 1,400,000 sq yd; 120 ha)
  • {{convert|1.2|km2|acre+sqyd+ha}} → 1.2 square කිලෝmetres (300 acres; 1,400,000 sq yd; 120 ha)

In the following, because "board feet" contains a space, using a space to make a combination fails.

  • {{convert|123|cuyd|m3 board feet}} → 123 cubic yards ([convert: unknown unit])
  • {{convert|123|cuyd|m3+board feet}} → 123 cubic yards (94 m3; 40,000 board feet)

The following converts a pressure to four output units. The precision is 1 (1 decimal place), and units are abbreviated and linked.

  • {{convert|895|hPa|psi inHg atm mbar|1|abbr=on|lk=on}} → 895 hPa (13.0 psi; 26.4 inHg; 0.9 atm; 895.0 mbar)

It is preferable to use "+" to separate output units when the first unit uses engineering notation; that avoids looking up the unit in Module:Convert/extra.

  • {{convert|1.2|AU|e6km+e6mi|abbr=on}} → 1.2 AU (180×10^6 km; 110×10^6 mi)
  • {{convert|1.2|AU|e6km+e6mi|abbr=unit}} → 1.2 AU (180 million km; 110 million mi)

Some "standard" combinations have been defined—see the full list of units.

Engineering notation

[සංස්කරණය]

Most units can be combined with a scale factor, for example, e6km represents a million kilometres. The following prefixes may be used; per WP:NUMERAL, values follow the short scale. If lk is on, the numbers are linked as shown below.

Engineering notation can only be applied to simple units—temperatures, combinations, and some other special units will not work.

Some examples using engineering notation follow.

  • {{convert|123.4|e3m2}} → 123.4 thousand square metres (1.328×10^6 sq ft)
  • {{convert|123.4|e3m2|e6sqft|abbr=off}} → 123.4 thousand square metres (1.328 million square feet)
  • {{convert|1.23|e6L}} → 1.23 million litres (320,000 US gal)
  • {{convert|1.23|e6L|e3usgal|abbr=off|lk=on|sp=us}} → 1.23 million liters (320 thousand U.S. gallons)
  • {{convert|1.23|e9impgal}} → 1.23 billion imperial gallons (5.6 Gl)
  • {{convert|1.23|e9impgal|e3usgal|abbr=off|lk=on}} → 1.23 billion imperial gallons (1,480,000 thousand US gallons)
  • {{convert|1.23|e12cuft}} → 1.23 trillion cubic feet (35×10^9 m3)

අක්ෂර දෝෂය: සැබෑ මොඩියුලක් නොමැත.

Hands (unit of length)

[සංස්කරණය]

A hand is a unit of length used to measure the height of horses. One hand is four inches, and a value of 12.3 hands represents 12 hands + 3 inches (51 inches).

  • By default, the unit is shown as a linked name (hands).
  • The hands unit can be abbreviated to "h" or to "hh"; by default, abbreviations are not linked.
    {{convert|27|in|hand}} → 27 අඟල් (6.3 hands)
    {{convert|27|in|hand|lk=off}} → 27 අඟල් (6.3 hands)
    {{convert|27|in|hand|abbr=h}} → 27 in (6.3 h)
    {{convert|27|in|hand|abbr=hh}} → 27 in (6.3 hh)
    {{convert|27|in|hand|abbr=hh|lk=out}} → 27 in (6.3 hh)
  • The hands value has at most one digit after the decimal mark, and has an optional fraction.
  • A precision of 2 assumes |frac=2 (round to nearest ​12 inch).
  • A precision of 3 or more assumes |frac=4 (round to nearest ​14 inch).
  • If ever needed, |frac=8 can be used to round to the nearest ​18 inch.
    {{convert|27.63|in|hand}} → 27.63 අඟල් (7.0 hands)
    {{convert|27.63|in|hand|0}} → 27.63 අඟල් (7 hands)
    {{convert|27.63|in|hand|1}} → 27.63 අඟල් (7.0 hands)
    {{convert|27.63|in|hand|2}} → 27.63 අඟල් (6.3 12 hands)
    {{convert|27.63|in|hand|3}} → 27.63 අඟල් (6.3 34 hands)
    {{convert|27.63|in|hand|frac=8}} → 27.63 අඟල් (6.3 58 hands)
    {{convert|28.5|in|hand|2}} → 28.5 අඟල් (7.0 12 hands)
    {{convert|28.5|in|hand|3}} → 28.5 අඟල් (7.0 12 hands)

Output in hands and inches

[සංස්කරණය]
  • When using "hand in" to convert to hands and inches, the rounded hands and inches values are equivalent, and use the same fraction, if any.
  • Special rounding of the inches value only occurs when "hand in" is the output. For example, if the output is "in hand", the inches value is rounded independently from the hands value.
    {{convert|156|cm|hand in}} → 156 සෙන්ටිමීටර (15.1 hands; 61 in)
    {{convert|156|cm|hand in|2}} → 156 සෙන්ටිමීටර (15.1 12 hands; 61 12 in)
    {{convert|156|cm|in hand}} → 156 සෙන්ටිමීටර (61 in; 15.1 hands)
    {{convert|156|cm|in hand|2}} → 156 සෙන්ටිමීටර (61.42 in; 15.1 12 hands)
    {{convert|156|cm|hand in|abbr=out}} → 156 සෙන්ටිමීටර (15.1 h; 61 in)
    {{convert|156|cm|hand in|abbr=h}} → 156 cm (15.1 h; 61 in)
    {{convert|156|cm|hand in|abbr=hh}} → 156 cm (15.1 hh; 61 in)
  • A range of values can be indicated with "-" (hyphen) or "to". When a dash is displayed by convert, it is always an en dash.
  • Alternatively, "and" and "or" can be used.
    {{convert|137|-|156|cm|hand in}} → 137–156 සෙන්ටිමීටර (13.2–15.1 hands; 54–61 in)
    {{convert|137|-|156|cm|hand in|2}} → 137–156 සෙන්ටිමීටර (13.2–15.1 12 hands; 54–61 12 in)
    {{convert|137|-|156|cm|hand in|abbr=in}} → 137–156 cm (13.2–15.1 hands; 54–61 අඟල්)
    {{convert|137|-|156|cm|hand in|abbr=h}} → 137–156 cm (13.2–15.1 h; 54–61 in)
    {{convert|137|-|156|cm|hand in|abbr=on}} → 137–156 cm (13.2–15.1 h; 54–61 in)
    {{convert|137|and|156|cm|hand in|abbr=on}} → 137 and 156 cm (13.2 and 15.1 h; 54 and 61 in)
    {{convert|137|or|156|cm|hand in|abbr=on}} → 137 or 156 cm (13.2 or 15.1 h; 54 or 61 in)
  • The following examples illustrate various combinations of options.
    {{convert|57|in|hand}} → 57 අඟල් (14.1 hands)
    {{convert|2|m|hand}} → 2 මීටර (19.3 hands)
    {{convert|137|cm|hand|2}} → 137 සෙන්ටිමීටර (13.2 hands)
    {{convert|137|cm|hand|2|sp=us}} → 137 සෙන්ටිමීටරs (13.2 hands)
    {{convert|14.1|hand|in}} → 14.1 hands (57 අඟල්)
    {{convert|14.1|hand|cm}} → 14.1 hands (145 cm)
    {{convert|14.1|hand|in cm}} → 14.1 hands (57 අඟල්; 145 cm)
    {{convert|14.1|hand|cm in}} → 14.1 hands (145 cm; 57 අඟල්)
    {{convert|14.1|-|14.3|hand|cm}} → 14.1–14.3 hands (145–150 cm)
    {{convert|14.1|-|14.3|hand|in cm}} → 14.1–14.3 hands (57–59 අඟල්; 145–150 cm)
    {{convert|50|-|57|in|hand}} → 50–57 අඟල් (12.2–14.1 hands)
    {{convert|2|-|3|m|hand}} → 2–3 මීටර (19.3–29.2 hands)
    {{convert|57|or|59|in|hand|abbr=on}} → 57 or 59 in (14.1 or 14.3 h)
    {{convert|137|-|139|cm|hand|lk=on}} → 137–139 සෙන්ටිමීටර (13.2–13.3 hands)
    {{convert|137|and|162|cm|hand|0|abbr=in|lk=in}} → 137 and 162 cm (13 and 16 hands)
    {{convert|137|and|162|cm|hand in}} → 137 and 162 සෙන්ටිමීටර (13.2 and 16.0 hands; 54 and 64 in)
    {{convert|9.2|hand}} → 9.2 hands (38 අඟල්; 97 cm)
    {{convert|9.2|hand|lk=off}} → 9.2 hands (38 අඟල්; 97 cm)
    {{convert|9.2|hand|abbr=h}} → 9.2 h (38 in; 97 cm)
    {{convert|9.2|hand|abbr=h|lk=in}} → 9.2 h (38 in; 97 cm)
    {{convert|9.2|hand|abbr=hh|lk=in}} → 9.2 hh (38 in; 97 cm)
    {{convert|9.2+1/2|hand}}9.2 12 hands (38.5 අඟල්; 98 cm)
    {{convert|9.2+3/4|hand}}9.2 34 hands (38.75 අඟල්; 98 cm)
    {{convert|9.2+3/4|hand|abbr=h}}9.2 34 h (38.75 in; 98 cm)
    {{convert|9.2+3/4|hand|cm in}}9.2 34 hands (98 cm; 38.75 අඟල්)
    {{convert|9.2+3/4|hand|cm in|abbr=out}}9.2 34 hands (98 cm; 38.75 in)
    {{convert|9.2+3/4|hand|cm in|abbr=on}}9.2 34 h (98 cm; 38.75 in)
    {{convert|9.2+3/4|hand|in}}9.2 34 hands (38.75 අඟල්)
    {{convert|9.2+3/4|hand|in|abbr=out}}9.2 34 hands (38.75 in)
    {{convert|9.2+3/4|hand|in|abbr=on}}9.2 34 h (38.75 in)
    {{convert|15.1|-|16.3|hand}} → 15.1–16.3 hands (61–67 අඟල්; 155–170 cm)
    {{convert|14.2|to|16.1|hand}} → 14.2 to 16.1 hands (58 to 65 අඟල්; 147 to 165 cm)