Motorcycle safety technology

Motorcycle safety technology encompasses a range of electronic, mechanical, and structural systems designed to improve rider safety and vehicle stability. These technologies aim to reduce the likelihood of crashes, minimise injury severity, and increase control under various riding conditions. Since the early 1980s, manufacturers and suppliers have developed increasingly sophisticated systems based on advances in electronics, sensors, and control software.

Overview

Motorcycle safety technology can be divided into two categories:

• Active safety systems - technologies that help prevent accidents by assisting the rider during operation.
• Passive safety systems - technologies that reduce injury in the event of a crash.

The most significant advancements have come from active safety, where sensors and control units continuously monitor wheel speed, traction, lean angle, and braking forces to intervene when necessary.^[1]

Active safety systems

Anti-lock braking systems (ABS)

Introduced widely in the late 1980s, motorcycle ABS prevents wheel lock-up during braking by modulating brake pressure. Modern ABS systems use wheel-speed sensors and electronic control units to optimise braking force and stability.^[2]

Cornering ABS (ABS Pro)

BMW Motorrad’s ABS Pro and similar systems from other manufacturers extend standard ABS by incorporating lean-angle data from an inertial measurement unit (IMU). This allows controlled braking while the motorcycle is cornering, reducing the risk of skidding or standing up mid-turn.^[3]

Traction control systems (TCS)

TCS detects wheel slip during acceleration and automatically reduces engine torque by adjusting fuel injection, ignition timing, or throttle position. Examples include BMW’s Dynamic Traction Control (DTC), Ducati’s DTC EVO, and Kawasaki’s KTRC.

Motorcycle Stability Control (MSC)

Developed by Bosch, Motorcycle Stability Control integrates ABS and traction control with six-axis IMU data to maintain stability during cornering and braking. It represents one of the first complete electronic safety ecosystems for motorcycles.^[4]

Electronic suspension adjustment

Systems such as BMW’s Dynamic ESA (Electronic Suspension Adjustment) automatically adapt damping and preload settings based on load, road surface, and riding mode, improving stability and comfort.

Ride-by-wire and riding modes

Modern motorcycles use electronic throttle control to deliver precise power response. Combined with selectable riding modes, such as “Rain,” “Sport,” or “Off-road”m these systems tailor throttle maps, traction control, and ABS settings to match conditions.

Adaptive cruise control and radar assistance

Introduced in the 2020s, radar-based adaptive cruise control maintains distance from other vehicles. Some systems integrate blind-spot detection and collision warnings, contributing to rider situational awareness.^[5]

Passive safety systems

Airbag systems

Motorcycle airbags appear both on the vehicle and in rider equipment. Honda introduced the first on-board airbag on the Honda Gold Wing in 2006. Wearable airbag vests and jackets, such as those developed by Alpinestars and Dainese, use accelerometers to deploy within milliseconds of a collision.^[6]

Protective gear integration

Helmets with emergency-release systems, electronically linked communicators, and data-recording functions contribute to rider protection and post-crash response.

Future developments

Emerging motorcycle safety research focuses on vehicle-to-vehicle (V2V) communication, predictive braking algorithms, and semi-autonomous intervention systems. Manufacturers and suppliers are collaborating with organisations such as the FIM and Euro NCAP to standardise advanced safety technologies across markets.^[7]

See also

• Anti-lock braking system
• Motorcycle Stability Control
• Dynamic Traction Control
• ABS Pro
• Dynamic ESA
• Motorcycle safety
• Vehicle safety technology

References

1. "Driver assistance systems for motorcycles". febiac.be. Retrieved 8 November 2025.
2. [hhttps://www.bmw-motorrad.co.uk/en/engineering/detail/Safety/abs-pro.html "BMW Motorrad introduces ABS Pro - enhanced safety when braking in bends"]. BMW Group PressClub Global. BMW Group. 1 July 2014. Retrieved 8 November 2025.
3. "How BMW's ABS Pro Works". www.rideapart.com. 14 August 2015. Retrieved 8 November 2025.
4. "Bosch Motorcycle Stability Control (MSC)". Bosch Mobility Solutions. Retrieved 8 November 2025.
5. "Bosch introduces radar-based assistance for motorcycles". www.dainese.com. Retrieved 8 November 2025.
6. "Motorcycle airbag technology explained". Visordown. Retrieved 8 November 2025.
7. "Future motorcycle safety technologies". FIM. Retrieved 8 November 2025.